
AltiGen SIP-Trunk Configuration Using Cbeyond
Page 3
First Steps
1. Obtain a SIP trunk license from AltiGen.
2. Register the license using AltiGen’s online license registration procedure.
3. Reboot AltiServ.
4. After the system is rebooted, SIP-Trunk should show as “not ready” in Trunk View.
5. If your AltiServ is behind a firewall / NAT router, configure the firewall / NAT router.
See AltiWare Administrator’s online Help: Index > AltiServ behind NAT > configuring.
If the firewall / NAT router is not properly configured, SIP trunks will not work.
Kommentare zu diesen Handbüchern