Altigen MAXCS 7.0 Update 1 MultiVOIP Configuration Bedienungsanleitung PDF herunterladen (Seite 14)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 14 of 27

To configure SIP-Tie Trunks, follow these steps:

1. Open the MultiVoIP configuration tool.

2. Select Configuration > Voice/Fax and configure these parameters:

• Set Select Channel to Channel 3

• Set DTMF to Out of Band – Fixed Duration

• Set Out Of Band Mode to SIP Info

• Set Coder to Manual

• Set Selected Coder to [email protected]ps

• Set Auto Call/OffHook Alert to Auto Call

• Check Generate Local Dial Tone.

• Set Phone Number to 150 (This means when the gateway sends a call to MaxCS, it will try to

ring extension 150. If extension 150 does not exist, the call will be sent to the MaxCS Auto

Attendant system.)

3. Select Configuration > Interface and configure the following parameters:

• Set Select Channel to Channel 3

• Set Interface Type to FXO

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Keine Kommentare

Altigen MAXCS 7.0 Update 1 MultiVOIP Configuration Bedienungsanleitung Seite 14